Awning fitment
What awning fits a VW Crafter (2017 on)?
On a standard-roof VW Crafter the awning to fit is the roof-mounted Fiamma F80S, on the UK right-hand-drive bracket. If you have a roof rack, or a super-high roof, the wall-mounted F45S is the one instead. Sizes below are by wheelbase; the Fit Finder confirms the exact bracket for your roof.
VW Crafter awning sizes by wheelbase
| Wheelbase | No roof rack (roof-mounted F80S) | With a roof rack (wall-mounted F45S) |
|---|---|---|
| MWB | Fiamma F80S 320cmbracket 98655Z058 | Fiamma F45S 325cm |
| LWB | Fiamma F80S 400cmbracket 98655Z058 | Fiamma F45S 400cm |
| XLWB | Fiamma F80S 450cmbracket 98655Z058 | Fiamma F45S 450cmsize confirmed before you pay |
Sizes are the fit for each wheelbase. The awning length is set by the van's side run, so the roof-mounted and wall-mounted awnings take the same size for the same van. Aero roof bars need a bracket matched to your bars.
Get your exact fit and price
Fit Finder
Which awning fits my van?
Answer a few questions and we'll point you at the right awning and mounting kit from Fiamma's fitment data.
Showing the fit for VW Crafter
Have you got a roof rack fitted?
An aftermarket roof rack or roof bars, the kind you'd carry gear or a board on. It changes which awning mounts to your van.
About the Fiamma F80S
The roof-mounted, low-profile Fiamma. It sits above door height and suits high-roof panel vans (Sprinter, Crafter, Ducato) with no clean side-wall fixing line. Sizes 290 to 450cm in Polar White, Titanium or Deep Black. Royal Grey or Royal Blue canopy (Deep Black is Royal Grey only). It needs a van-specific bracket kit, which the Fit Finder has already matched for you above.
- Mount
- Roof-mounted (low profile)
- Sizes
- 290 to 450cm
- Case colours
- Polar White, Titanium, Deep Black
- Fabric
- Royal Grey or Royal Blue
- Operation
- Manual crank (electric motor kit optional)
- Bracket
- Van-specific kit required (matched above)
Manuals & documents
Common questions
Do I need a bracket kit for a Fiamma F80S?
Yes, always. The F80S does not fit any van without a van-specific bracket kit, bought separately. The Fit Finder has confirmed the exact part for your van above.
Can I fit a Fiamma F80S myself?
Yes, if you are a confident self-builder, but it is a two-person job to lift the awning onto the roof, and any roof drilling must be sealed properly. If you are not sure about the roof fixing, use an installer.
What is the difference between the F80S and the F45?
The F80S is roof-mounted; the F45 range is wall-mounted. Roof mounting suits vans with no clean side-wall fixing line and places the awning above door height.
Is the F80S manual or electric?
It comes with a hand crank for manual wind-out. Fiamma sells an optional electric motor kit that can be added later, and the awning is ready for optional LED lighting on the lead bar and rear casing.
VW Crafter awning FAQs
What size awning does a VW Crafter take?
By wheelbase: the MWB takes a 320cm F80S (or 325cm F45S on a rack), the LWB a 400cm, and the XLWB (Maxi) a 450cm. The awning must not overhang past the rear doors.
Do I need a bracket for a Crafter awning?
Yes for the roof-mounted F80S — a van-specific kit (Fiamma make no right-hand-drive roof-rail kit for the Crafter II, so a UK van uses the bare-roof RHD kit 98655Z058). The wall-mounted F45S on a rack uses a bar adapter instead.
F80S or F45S for a Crafter?
No roof rack → the roof-mounted F80S. Roof rack fitted, or a super-high roof → the wall-mounted F45S. Both are the same size for the same van; it comes down to how it mounts.